CRISARTECH RR410

A CRISARTECH cadencer is:

  • a display made in Germany, software and accessories for regularity in France, a guarantee of quality and a pre/post sales service of the highest level
  • first-class ergonomics (touch screen, infrared remote control, menus, pop-up windows, etc.),
  • excellent readability thanks to the color
  • multilingual menu and configuration (F / GB / E / D / I)
Categories: ,

Description

RR410 Touch Timer

We present two configurations based on the renowned Crisartech Tripmaster RR410, a device renowned for its victories in prestigious international races such as the Trophée des Alpes, Tour de Corse, e-rallye Monte-Carlo, Monte-Carlo Historique, and Costa Brava Històric.
It is the ideal cadencer for all crews, from beginners to experts. It allows crews to precisely manage their speed at all times. It eliminates or corrects almost all handling errors, thus reducing stress during the race. It measures distances independently via GPS, right, and left wheel to improve safety in the event of a sensor failure. Calibration is very simple, fast, and precise.

The stopwatch calculates and displays the time difference in 1/10 s and recommends an ideal speed to avoid the yo-yo effect (acceleration/braking/acceleration, etc.). Guidance is provided using a multi-color bar graph (yellow to red for slowdown and blue to green for fast forward) and an acoustic signal.

It can handle 99 average segments across 99 regularity zones. These areas can be set up with a touch screen, remote control or computer (USB key). The stopwatch is started manually or automatically at a specific time synchronized with the GPS time. Distances can be set and corrected, to the nearest meter, with the touch screen or remote control.

 

Display in the regularity zone:

  • chrono,
  • ZR speed, recommended and actual,
  • GPS status, ZR, segment,
  • time difference 1/10 s.,
  • main travel destination.

 

View the link:

  • time,
  • calculated check-in time, distance/time and average countdown to arrival
  • vehicle speed, battery voltage,
  • second independent trip.

 

Installation can be done with:

  • a sensor on one or two non-drive wheels,
  • the OBDII socket of a modern car to supply power and acquire speed/mileage information,
  • a very sensitive, fast and precise GPS.
  • installation/uninstallation on an OBDII or GPS socket takes 2 minutes without damaging the vehicle, ideal for training in a modern car!

 

Basic Kit Example

GPS distance adjustment option (without GPS receiver)
Tripmaster RR410 / regularity rally timer with internal interface box
12V power harness for VH (with mounted and shrouded connector)
2 or 3-wire D or G wheel sensor harness for VH (with mounted and shrouded connector)
2 m external precision 10Hz waterproof GPS receiver
6 multicolor LED “heads-up” display module on the windshield (HUD)
Infrared remote control with numbers
220V power supply for off-vehicle use
Inductive wheel speed sensor (without connector, tip on screw heads, etc.) RR420 cable gland

 

Advanced Kit Example

GPS distance adjustment option (without GPS receiver)
Tripmaster RR410 / regularity rally timer with internal interface box
12V Power Harness for VH (with connector fitted and sheathed)
2 or 3 wire D or G wheel sensor harness for VH (with mounted, sheathed connector) 2m Waterproof 10Hz precision external GPS receiver
Infrared remote control with numbers
220V power supply for off-vehicle use
Inductive wheel speed sensor (without connector, tip on screw heads, etc.) RR420 cable gland strip
RP380 pilot display (4.3” color TFT)

 

BROCHURE CRISARTECH RR410

 

Reviews

There are no reviews yet.

Be the first to review “CRISARTECH RR410”

Your email address will not be published. Required fields are marked *

Go to Top